20V 3A 4-Switch Buck-Boost Converter CXSB6616 is a high performance buck boost converter that the output voltage can be programedfrom 0.9V up to 20V through external resistor
High Efficiency, 3A, Multi-Cells Li-Ion Battery Charger 单电感集成4个开关的升降压转换器CXSB6618A/CXSB6618A-1 is a buck boost convertertargetsHVDC fast charging system
The CXSD6119 is a 1.5MHz constant frequency, slope compensated current mode PWM stepdown converter. The device integrates a main switch and a synchronous rectifier for high efficiency without an ext
CXSD6142 current mode monolithic buck switching regulator ,Operating with an input range of 4.7V~40V, delivers 600mA of continuous output current with two integrated N-Channel MOSFETs
40V, 600mA , Step-Down Converter CXSD6143 is a high frequency (1.8MHz) step-down switching regulator with integrated internal high-side high voltage power MOSFET. It provides single 0.6A highly
1.5A 2MHz 6V Synchronous Buck Converter CXSD61067 is a high-efficiency, DC to DC step-down switching regulators, capable of delivering up to 1.5A of output current. The device operates from an input v
5V/3.2A 150KHz 40V Buck DC to DC Converter For USB Interface ,CXSD61027 built in output short protection function. When short protection function happens, the chip will be shutdown
3A 150KHz 40V Buck DC/DC Converter With Constant Current Loop CXSD61017 is a 150KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 2.5A load with high efficiency
800 mA up to 40V Input Step-Down DC/DC Regulator CXSD61006B,PWM DC/DC buck (step-down) regulators. With a wide input range from 4.75V-40V, they are suitable for a wide range of applications such
Dual Channel PWM Controller with SCP / DTC Function CXSD6183 is a dual channel PWM buck controller with short circuit protection (SCP) and adjustable maximum duty control (DTC) function.
Dual PWM Controller With SCP / DTC Function CXSD6184,includes one 2.5V precision voltage reference regulator, two error amplifiers, PWM control circuits, totem-pole output stages and the under voltage
The CXSD6205T CXSD6205S is a current mode monolithic buck voltage converter. Operating with an input range of 3.7V-18V 2A of continuous output current with two integrated N-Channel MOSFETs. At light l
CXSD6209A internal synchronous power switches provide high efficiency without
the use of an external Schottky diode. At light loads, regulators operate in low frequency to
maintain high efficiency and low output ripple. Current mode control provides tight load transient response and cycle-by-cycle current limit
