CXLB7363单电池锂离子电池的完整恒流恒压线性充电器可编程充电电流1000毫安充电电压固定4.21V充电电流可通过一个电阻器进行外部编程

CXLB7363是一款适用于单电池锂离子电池的完整恒流恒压线性充电器。它的标准操作程序包和低外部组件数使CXLB7363非常适合便携式应用。此外，CXLB7363是专门设计的工作在USB电源规格。不需要外部感测电阻，也不需要阻塞二极管，因为内部的MOSFET结构。热反馈调节充电电流，以在高功率运行或高环境温度下限制模具温度。充电电压固定在4.21V，充电电流可通过一个电阻器进行外部编程。达到最终浮充电压后，当充电电流降至编程值的1/10时，CXLB7363自动终止充电循环。
当卸下输入电源（墙壁适配器或USB（电源））时，CXLB7363自动进入低电流状态，将电池放电电流降至小于2uA。CXLB7363可以进入停机模式，将电源电流降低到50uA。其他功能包括电池温度监视器，欠压锁定，自动充电和两个状态引脚，以指示充电和充电终止

                          目录

   1.产品概述      2.产品特点      3.应用范围     4.技术规格书下载（PDF文档）

   5.产品封装      6.电路原理图     7.相关产品

一.产品概述

---

    The CXLB7363 is a complete constant current & constant voltage linear charger for single cell lithium-ion batteries. Its SOP package and low external component count make the CXLB7363 ideally suited for portable applications.Furthermore, the CXLB7363 is specifically designed to work within USB power specifications.No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.21V, and the charge current can be programmed externally with a single resistor. The CXLB7363 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.

    When the input supply (wall adapter or USB (supply) is removed, the CXLB7363 automatically enters a low current state, dropping the battery drain current to less than 2uA. The CXLB7363 can be put into shutdown mode, reducing the supply current to 50uA. Other features include Battery temperature monitor, under-voltage lockout, automatic recharge and two status pins to indicate charge and charge termination.

二.产品特点

---

Programmable Charge Current Up to 1000mA

No MOSFET, Sense Resistor or Blocking Diode Required

Complete Linear Charger in SOP Package for single Cell Lithium-lon Batteries

Constant-Current/Constant-Voltage Operation

with Thermal Regulation to Maximize Charge

Rate Without Risk of Overheating

Charges Single Cell Li-Ion Batteries Directly from USB Port

Preset 4.21V Charge Voltage with ±1% Accuracy

Charge Current Monitor Output for Gas Gauging Automatic Recharge

Charge state pairs of output, no battery and fault status display

ESD HBM 8KV

Available in SOP8-PP Package

三.应用范围

---

Cellular Telephones, PDAs, MP3 /MP4 Players

Charging Docks and Cradles

Bluetooth 、GPS Applications    

四.技术规格书（产品PDF)

---

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！

 

五.产品封装图

---

  

六.电路原理图

---

   

七.相关芯片选择指南  更多同类产品......

---

线性充电管理
PN	Vin	VBAT	Icharge	Cell	Trickle	Charge	Charge	Package	Description
	V	V	(A)		charge	status	Type
CXLB7363	4.5~6	4.21	1	1	Yes	Yes	CC/CV	SOP8-PP	1A锂电池线性充电管理，带涓流充电和电芯温度检测
CXLB7364	4.5~6	4.2	0.6	1	Yes	Yes	CC/CV	SOT23-5	0.6A锂电池线性充电管理，带涓流充电
CXLB7365	4.5~6	4.35	1	1	yes	yes	CC/CV	SOP8-PP	1A锂电池线性充电管理，带涓流充电和电芯温度检测