
可编程充电电流1000毫安CXLB73124单电池锂离子电池的完整恒流恒压线性充电器热反馈调节充电电流在高功率运行或高环境温度下限制模具温度充电电压固定在4.2V充电电流可通过一个电阻器进行外部编程
| 产品型号: | CXLB73124 |
| 产品类型: | 电池充电IC |
| 产品系列: | 单节锂电池充电芯片 |
| 产品状态: | 量产 |
| 浏览次数: | 40 次 |
产品简介
技术参数
| 输入电压范围 (VIN) | V ~ 8VV |
|---|---|
| 输出电压 (VOUT) | 4.22?V |
| 输出电流 (IOUT) | 1A A |
| 工作频率 | 3MHz |
| 转换效率 | 94% % |
| 封装类型 | PSOP8/DFN2*2-6? |
| Type | 单节锂电池充电芯片 |
| Charge voltage | 8V |
| Charge current | 1A |
| Battery type | 4.22 |
| Charge method | CC/CV线性模式 |
| Charge status | 单灯 |
| Protection | 过流/过压/过温/过充/短路 |
| Communication | QC2.0 QC3.0 |
| Features | 单节锂电池充电芯片 |
| Application | 电池充电IC |
| Iq | 25μA |
| 电池节数 | 1节锂电池 |
| 精度 | ±1% |
| 充电载止电压 | 充电结束时电压(V):4.2V |
产品详细介绍
目录
7.相关产品
产品概述 返回TOP
The CXLB73124 is a complete constant - current & constant-voltage linear charger for single cell lithium-ion batteries. Its PSOP8 package and low external component count make the CXLB73124 ideally suited for portable applications. Further more , the CXLB73124 can work within USB and wall adapter. No blocking diode is required due to the internal PMOSFET architecture and have prevent to negative Charge Current Circuit. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The CXLB73124automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. CXLB73124Other features include current monitor, under voltage lockout, automatic recharge and two status pin to indicate charge termination and the presence of an input voltage.
产品特点 返回TOP
Programmable Charge Current Up to 1000mA
No MOSFET, Sense Resistor or Blocking Diode Required
Complete Linear Charger in SOP-8 Package for Single Cell Lithium-Ion Batteries
Constant-Current/Constant-Voltage
Charges Single Cell Li-Ion Batteries Directly from USB Port
Preset 4.2V Charge Voltage with 1.5% Accuracy
Automatic Recharge
Two Charge Status Output Pins
C/10 Charge Termination
2.9V Trickle Charge Threshold
Soft-Start Limits Inrush Current
Available Radiator in PSOP8 Package, the Radiator need connect GND or impending
应用范围 返回TOP
Charging Docks and Cradles
Cellular Telephones, PDAs, GPS
MP3、MP4 Player
Digital Still Cameras, Portable Devices
USB Bus-Powered Chargers, Chargers
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!

产品封装图 返回TOP

电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
Battery Charger(锂电池充电) |
|||||||
|
Product |
status |
VccMax |
Vbat |
IOUT Max |
Polarity Detect |
OTP、OCP |
Pkg |
|
Active |
8V |
4.35 |
1A |
NO |
Yes |
SOT23-5 PSOP8 |
|
|
Active |
8V |
4.22 |
1A |
NO |
Yes |
SOP8 PSOP8(电子烟) |
|
|
Active |
8V |
4.22 |
800mA |
NO(单灯) |
Yes |
SOT23-5 |
|
|
Active |
8V |
4.22 |
800mA |
NO(双灯) |
Yes |
SOT23-6 PSOP8 |
|
|
Active |
8V |
4.22 |
1A |
NO |
Yes |
PSOP8/DFN2*2-6 |
|
|
Active |
8V |
4.22/4.35 |
2.5A |
YES(单灯) |
Yes |
PSOP8 |
|
|
Active |
8V |
4.22/4.35 |
2.5A |
YES(双灯) |
Yes |
PSOP8 |
|

中文
English
用户评论