带ON/OFF功能双路150mA高速LDO小型CMOS电压调整器低导通电阻激光微调技术瞬态响应CXLD64214

目录

1.产品概述       2.产品特点     K5N嘉泰姆

3.应用范围       4.技术规格书下载（PDF文档）K5N嘉泰姆

5.产品封装       6.电路原理图  K5N嘉泰姆

7.相关产品K5N嘉泰姆

   产品概述 返回TOPK5N嘉泰姆

     CXLD64214系列是实现了高精度,高纹波抑制,低压差,双路150mA高速LDO的小型CMOS电压调整器IC。把2个低导通电阻LDO装入小型封装能实现高密度实装。激光微调技术能在1.2V～3.6V的范围内以0.05V的间隔在精度±2.0%以内设定输出电压。控制各个EN引脚能停止各个电压调整器的输出,使其处于待机状态。此外，由内部开关使稳定输出的电容（CL）的充电电荷放电，此高速放电功可使VOUT引脚高速地返回到VSS电平。稳定输出的电容（CL）能与陶瓷电容等低ESR电容相对应，其良好的瞬态响应特性即使在负载发生变动时，也能提供稳定的输出电压。由于各个电压调整器的输出被相互隔离，能把输出负载变动引起的各个调整器之间的干扰抑制在极小的范围内。The CXLD64214 series is a small dual CMOS LDO regulator with 2-channel 150mA outputs. The series features high speed, high accuracy, high ripple rejection and low dropout voltage. The series is capable of high density board installation by the small package of two low on-resistance regulators. Each output voltage is internally set in a range from 1.2V to 3.6V in increments of 0.05V with ±2% accuracy. The EN function controls the two regulators on/off independently. In the stand-by mode, the electric charge at the output capacitor CL is discharged via the internal switch and as a result the VOUT pin quickly returns to the VSS level. The series is also compatible with low ESR ceramic capacitors. The high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance. The two regulators are completely isolated so that a cross talk during load fluctuations is minimized.K5N嘉泰姆

   产品特点 返回TOPK5N嘉泰姆

K5N嘉泰姆

   应用范围 返回TOPK5N嘉泰姆

● Smart phones / Mobile phones K5N嘉泰姆

● Portable game consoles K5N嘉泰姆

● Digital audio equipments K5N嘉泰姆

● Digital still cameras / CamcordersK5N嘉泰姆

   技术规格书（产品PDF) 返回TOP K5N嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！K5N嘉泰姆

 K5N嘉泰姆

产品封装图 返回TOPK5N嘉泰姆

K5N嘉泰姆

电路原理图 返回TOPK5N嘉泰姆

 K5N嘉泰姆

 K5N嘉泰姆

相关芯片选择指南 返回TOP                   更多同类产品......

 K5N嘉泰姆