|
CXSD61019 180 KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 3.5A lo | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
目录产品概述 返回TOP The CXSD61019 is a 180 KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 3.5A load with high efficiency, low ripple and excellent line and load regulation. Requiring a minimum number of external components, the regulator is simple to use and include internal frequency compensation and a fixed-frequency oscillator.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Pin Number | Pin Name | Description |
| 1 | NC | No Connected. |
| 2 | SW | Power Switch Output Pin (SW). SW is the switch node that supplies power to the output. (Note: Connected the back exposed PAD to SW.) |
| 3 | GND | Ground Pin. Care must be taken in layout. This pin should be placed outside of the Schottky Diode to output capacitor ground path to prevent switching current spikes from inducing voltage noise into CXSD61019. |
| 4 | FB | Feedack Pin (FB). Through an external resistor divider network, FB senses the output voltage and regulates it. The feedback threshold voltage is 1.25V. |
| 5 | EN | Enable Pin. Drive EN pin low to turn off the device, drive it high to turn it on. |
| 6 | OCSET | Output Constant Current Set Pin. |
| 7 | VC | Internal Voltage Regulator Bypass Capacity. In typical system application, The VC pin connect a 1uf capacity to VIN. |
| 8 | VIN | Supply Voltage Input Pin. CXSD61019 operates from a 8V to 36V DC voltage. Bypass Vin to GND with a suitably large capacitor to eliminate noise on the input. |
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
DC-DC降压IC |
|||||||
|
型号 |
输入耐压 |
输出电压 |
输出电流 |
反馈电压 |
工作频率 |
静态工作电流 |
|
|
42V |
可调输出/带CC/cv模式 恒流模式保护 |
3.5A |
0.8V |
125K |
94% |
3mA |
|
|
42V |
可调输出/带CC/cv模式 恒流模式保护 |
3A |
0.8V |
125K |
94% |
3mA |
|
|
42V |
可调输出/带CC/cv模式 恒流模式保护 |
2.5A |
0.8V |
125K |
94% |
3mA |
|
|
40V |
可调输出/带CC/cv模式 |
3A |
0.8V |
225K |
92% |
2.84mA |
|
|
50V |
5V固定输出 |
3.2A |
150K |
87% |
4.7mA |
||
|
50V |
5V固定输出 |
2.4A |
150K |
89% |
4.7mA |
||
|
50V |
5V固定输出 |
2.1A |
150K |
90% |
4.7mA |
||
|
50V |
5V固定输出 |
1.8A |
150K |
90% |
4.7mA |
||
|
40V |
可调输出/带CC/CV模式带线损补偿 |
3A |
0.8V |
125K |
94% |
4mA |
|
|
40V |
5V固定输出 |
3.5A |
150K |
93% |
2mA |
||
|
45V |
可调输出/ |
2A |
1.23V |
150K |
93% |
2mA |
|
|
40V |
可调输出/带CC/CV模式 |
2A |
1.18V |
110K |
93% |
10mA |
|
|
42V |
可调输出 |
3A |
0.8V |
50-500K |
91% |
3mA |
|
|
40V |
可调输出/带CC/cv模式 |
3A |
1.25V |
180K |
89% |
2.1mA |
|
|
40V |
可调输出/带CC/cv模式 |
3.5A |
1.25V |
180K |
87% |
2.1mA |
|
|
45V |
可调输出/带CC模式 |
3A |
1.25V |
150K |
89% |
2.0mA |
|
|
45V |
可调输出/带CC模式 |
2A |
1.235V |
150K |
83% |
2.0mA |
|
|
4.75V-40V |
可调输出 |
0.8A |
0.8V |
550K |
90% |
10uA |
|
|
4.0-42V |
可调输出 |
1.5A |
0.8V |
650K |
91% |
600uA |
|
|
4.5-25V |
可调输出 |
1.8A |
0.8V |
1.4M |
92% |
1.8mA |
|
|
20V |
可调输出 |
3.5A |
1.2V |
400K |
89% |
700uA |
|
|
28V |
可调输出 |
3A |
1.22V |
380K |
89% |
3mA |
|
|
20V |
可调输出 |
3A |
0.8V |
380K |
88% |
3mA |
|
|
20V |
可调输出 |
2A |
0.8V |
380K |
89% |
2mA |
|
|
45V |
5.0V/可调输出/3.3/12V |
2A |
1.23V |
150K |
82% |
2mA |
|
|
45V |
5.0V/可调输出 |
3A |
1.23V |
380K |
73% |
2mA |
|
|
27V |
可调输出 |
2A |
1.22V |
420K |
95% |
1mA |
|
