CXLB7327单电池锂离子电池的完整恒流恒压线性充电器电池反向连接保护预设4.2V充电电压2.9V涓流充电阈值软启动限制涌入电流

CXLB7327单电池锂离子电池的完整恒流恒压线性充电器电池反向连接保护预设4.2V充电电压2.9V涓流充电阈值软启动限制涌入电流

产品型号:CXLB7327
产品类型:电池充电IC
产品系列:单节锂电池充电芯片
产品状态:量产
浏览次数:44 次
加入收藏

产品简介

CXLB7327是一款适用于单电池锂离子电池的完整恒流/恒压线性充电器。此外,CXLB7327A专门设计用于USB电源规格。由于内部PMOSFET结构,无需外部感测电阻器,也无需阻塞二极管。热反馈调节充电电流,以限制高功率运行或高环境温度下的模具温度。充电电压固定在4.2V,充电电流可以用一个电阻在外部编程。达到最终浮充电压后,当充电电流降至编程值的1/10时,CXLB7327A自动终止充电循环。当输入电源(墙壁适配器或USB电源)被卸下时,CXLB7327A自动进入低电流状态,将电池放电电流降至小于2μa。CXLB7327A可进入关机模式,将电源电流降至55μa。其他功能包括充电电流监视器、欠压锁定,自动充电和状态

技术参数

输入电压范围 (VIN) V ~ 4.25-6.5VV
输出电压 (VOUT)4.2VV
输出电流 (IOUT)800mAA
工作频率3MHz
转换效率92%%
封装类型SOT23-5
Type单节锂电池充电芯片
Charge voltage4.25-6.5V
Charge current800mA
Battery type4.2V,4.35V
Charge method线性
Charge status2LED
Protection过流/过压/过温/过充/短路
CommunicationQC2.0 QC3.0
Features单节锂电池充电芯片
Application电池充电IC
Iq55uA
电池节数1节锂电池
精度±1%
充电载止电压4.2V

产品详细介绍

目录

  1. 1.产品概述    2.产品特点     

  2. 3.应用范围    4.技术规格书下载(PDF文档)

  3. 5.产品封装    6.电路原理图  

     7.相关产品

产品概述

 

CXLB7327A is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. Furthermore the CXLB7327A is specifically designed to work within USB power specifications. No external sense resistor is needed and no blocking diode is required due to the internal PMOSFET architecture .Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature .The charge voltage is fixed at 4.2V,and the charge current can be programmed externally with a single resistor. The CXLB7327A automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed the CXLB7327A automatically enters a low current state dropping the battery drain current to less than 2μA.The CXLB7327A can be put into shutdown mode reducing the supply current to 55μA. Other features include charge current monitor, undervoltage lockout, automatic recharge and a status.

产品特点

 

●Protection of battery cell reverse connection 

●No MOSFET sense resistor or blocking diode required 

●Complete Linear Charger in ThinSOT Package for Single Cell Lithium-Ion Batteries 

●Constant-Current/Constant-Voltage operation with thermal regulation to maximize Rate Without risk of overheating. 

● Preset 4.2V charge voltage with ±1% accuracy 

● Automatic Recharge 

●Charges Single Cell Li-Ion Batteries Directly from USB Port 

●C/10 charge termination 

● 55μA supply current in shutdown 

● 2.9V trickle current charge threshold 

● Soft-Start limits inrush current 

●Charge Status Output Pin 

●Available in SOT23-5 Package

应用范围

 

●Cellular Telephones, PDAs, MP3 Players 

●Charging Docks and Cradles 

●Bluetooth Applications

技术规格书(产品PDF)

 

需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持

 QQ截图20160419174301.jpg

产品封装图

 

blob.png

blob.png

电路原理图

 


blob.png

相关芯片选择指南

   更多同类产品......
Li-ion   Battery Charger(锂电池充电芯片)
Part Number VFLOAT VIN Max Charger Charger Accu. IQ Package
Type
CXLB7326 4.2V 4.25-6.5V 800mA Linear ±1% 25uA SOT23-5
CXLB7327 4.2V 4.25-6.5V 800mA Linear ±1% 55uA SOT23-5
CXLB7328 4.2V 4.25-6.5V 800mA Linear ±1% 55uA SOT23-5
CXLB7329 4.2V 4.25-6.5V 800mA Linear ±1% 55uA SOT23-6
CXLB7330 4.2V/4.34V 4.25-6.5V 1000mA Linear ±1% 55uA ESOP8
CXLB7331 4.2V/4.34V 4.25-6.5V 1000mA Linear ±1% 55uA ESOP8
CXLB7332 8.4V/8.7V 4.7-20V 2000mA Switch ±1% 10uA SOP8
CXLB7333 4.2V/4.34V 4.7-5.5V 2000mA Switch ±1% 1uA ESOP8
Applications:①Mobile phone②MID③PDA④Battery   Charger⑤Bluetooth equipment

用户评论

共有条评论
用户名: 密码:
验证码: 匿名发表