
CXHA3189热敏电阻和外部电阻设置的双远程温度开关打开漏极激活低输出级阈值由外部电阻和负温度系数热敏电阻设置两个传感器提供开漏、激活的低温过温输出
| 产品型号: | CXHA3189 |
| 产品类型: | 霍尔传感器 |
| 产品系列: | 开关双极线性全极霍尔数字接口温度传感器 |
| 产品状态: | 量产 |
| 浏览次数: | 51 次 |
产品简介
由热敏电阻和外部电阻设置的双远程温度开关
打开漏极激活低输出级
·保证输出信号对VCC有效=0.8V
技术参数
| 输入电压范围 (VIN) | ≤ 2.7~5.5VV |
|---|---|
| 输出电压 (VOUT) | 0.9~4.2VV |
| 输出电流 (IOUT) | 40mAA |
| 工作频率 | 1MHzHz |
| 转换效率 | 95%% |
| 封装类型 | SOT-23-8/ AQFN1.5X1.5-8 |
| Sensor type | 开关双极线性全极霍尔数字接口温度传感器 |
| Output type | Remote/Local |
| Sensitivity | 2.5~0.3V |
| Response time | 1-10μs |
| Operating temp | -40℃~150℃ |
| Detection direction | 全极型霍尔 |
| Features | Remote |
| Application | Thermal Switch热开关 |
| Power supply | 2.7~5.5V |
| Coil Type | Half Wave |
| 静态电流 | 5uA |
| Hysterisis VCC or GND (°C) | Set by Resistor |
| Output Type | Open Drain |
| Accuracy (°C) | -- |
产品详细介绍
目录
7.相关产品
产品概述 返回TOP
The CXHA3189 are fully integrated, resistor programmable dual remote temperature switches. The thresholds are set by external resistors and negative temperature coefficient thermistors. The CXHA3189 provides open-drain, active low over-temperature outputs for both sensors. These switches operate with a +2.7V to +5.5V single supply. The CXHA3189 are available in 8-pin SOT-23 and AQFN1.5X1.5 packages.
产品特点 返回TOP
„ Duel Remote Temperature Switches Set by Thermistor and External Resistors
„ Open-Drain Active Low Output Stage
„ Guaranteed Output Signal Valid to VCC = 0.8V
„ SOT-23-8 and AQFN1.5X1.5-8 Packages
应用范围 返回TOP
„ μP Temperature Monitoring in High-Speed Computers
„ Temperature Control
„ Temperature Alarms
„ Fan Control
„ Automotive
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!

产品封装图 返回TOP

电路原理图 返回TOP

相关芯片选择指南 返回TOP 更多同类产品......
|
Temperature Transducer |
|||||||||
|
Part NO. |
VCC(V) min. |
VCC(V) max. |
Sensor Gain |
VOUT (V) |
Sensor Range(°C) |
Accuracy (°C) |
Isupply (μA) |
Note |
Package |
|
2 |
5.5 |
-11.6 |
2.5~0.3 |
-55~130 |
±1 |
18 |
Negative temperature coefficient output |
TO126F/SC70-5(SOT353) |
|
|
Digital Interface Temperature Sensor |
|||||||||
|
Part NO. |
VCC(V) min. |
VCC(V) max. |
Remote |
Local |
Interface |
Slave Address |
Accuracy (°C) |
Note |
Package |
|
3 |
5.5 |
N |
1 |
SMBus |
1001XXX |
±2 |
8 slave addresses 9 bits resolution |
SOP8/MSOP8/TDFN3X3-8 |
|
|
3 |
5.5 |
N |
1 |
SMBus |
1001XXX |
±1 |
8 slave addresses 11 bits resolution |
SOP8/MSOP8/TDFN3X3-8 /TDFN3X2-8 |
|
|
3 |
3.6 |
N |
1 |
SMBus |
1001000 |
±1 |
-10°C to 80°C±1°C(max) |
SOT23-5 |
|
|
3 |
5.5 |
1 |
1 |
SMBus |
1001100 |
±1 |
Support transitor mode |
SOP8/MSOP8 |
|
|
3 |
5.5 |
1 |
1 |
SMBus |
1001100 |
±1 |
Remote up to 160°C |
SOP8/MSOP8/TDFN3X3-8 |
|
|
3 |
5.5 |
N |
1 |
SMBus |
1001100 |
±3 |
Local temperature sensor |
MSOP8 |
|
|
3 |
5.5 |
2 |
1 |
SMBus |
1001100 |
±1 |
Support transistor mode |
MSOP10 |
|
|
3 |
5.5 |
1 |
1 |
SMBus |
1001100 |
±1 |
SMBus inputs are built-in switch to prevent reverse leakage |
SOP8/MSOP8/TDFN3X3-8 |
|
|
3 |
5.5 |
1 |
1 |
SMBus |
1001100 |
±1 |
Griffin |
SOP8 MSOP8 |
|
|
Thermal Switch |
|||||||||
|
Part NO. |
VCC(V) min. |
VCC(V) max. |
Sensor |
Hysterisis VCCGND |
Output Type |
Accuracy (°C) |
Isupply (μA) |
Note |
Package |
|
4 |
5.5 |
-- |
10 or 30 |
Open Drain |
±3.5 |
33 |
N/A |
SOT23-5 |
|
|
3 |
5.5 |
Remote |
10 or 2 |
Open Drain |
±3 |
-- |
OT is set by SET0 and SET1, Thermal diode needed |
SOP8/MSOP8 |
|
|
2.7 |
5.5 |
Local |
10 or 30 |
Open Drain |
±3.5 |
33 |
OT is set by an external resistor |
SOT23-5/TDFN2X2-8 |
|
|
2.7 |
5.5 |
Local |
10 or 2 |
Open Drain |
±3.5 |
33 |
OT is set by an external resistor |
TDFN2X2-8/ADFN1.5X1.5-6/SOT23-5/SOT23-6 |
|
|
2.7 |
5.5 |
Remote |
Set by Resistor |
Open Drain |
-- |
70 |
8 Remote SensorsThermistor is needed |
TQFN3X3-16 |
|
|
2.7 |
5.5 |
Remote |
Set by Resistor |
Open Drain |
-- |
42 |
2 Remote SensorsThermistor is needed |
SOT23-8/AQFN1.5X1.5-8 |
|

中文
English
用户评论