中文
English
CXAR41171是高效率3W单声道的D类音频放大器低噪声的filterlessPWM的架构无需输出滤波器在输出负载为4Ω的扬声器上输送出3W/10%或2W/1%的输出功率及失真度高效能的特性电源电压3.6V而输出负载为8Ω扬声器输出功率400mW时其效率为88%
| 产品型号： | CXAR41171 |
| 产品类型： | 运算放大器 |
| 产品系列： | D类音频功放电路 |
| 产品状态： | 量产 |
| 浏览次数： | 48 次 |
产品简介
• 单一调变方案来减少EMI干扰
• 工作电压3.6V,负载8Ω的扬声器:
- 输出功率400mW时，效率高达88%
- 输出功率100mW时，效率高达80%
• 静态电流 2.4mA，关断电流0.5uA
• 工作电压2.5 V至5.5 V
• 采用优化的PWM输出架构，无需输出LC滤波器
• 高PSRR(-72dB)，无需稳压器
• 全差动设计用以抑制射频干扰，无需旁通电容
• 高CMRR，输入无需耦合电容器
• 内部工作频率250kHz
• 内含POP 及Click噪音抑制电路
• 1.5mmx1.5mm WCSP 及 3mmx3mm TDFN-8 封装
• 符合RoHS规范及Pb-Free
技术参数
| 输入电压范围 (VIN) | ≤ 2.5 ~ 5.5VV |
|---|---|
| 输出电流 (IOUT) | 18mAA |
| 封装类型 | TDFN-8, WCSP |
| Topology | D类音频功放电路 |
| Control method | No of Speaker Channel:1 |
| Quiescent current | 4.3 |
| Noise | 72 |
| Features | Speaker (W):3 |
| Application | Speaker (Ω):4 |
| Protections | Headphone:N/A |
| Slew rate | THD +N @ 1KHz (%):0.18 |
产品详细介绍
目录
7.相关产品
产品概述 返回TOP
CXAR41171是一款高效率的，3W单声道的D类音频放大器。它用一种低噪声的、filterlessPWM的架构，无需输出滤波器，减少外围器件数，降低系统成本，简化系统设计。当电源电压为5V时，CXAR41171 能在输出负载为4Ω的扬声器上，输送出3W/10%或2W/1%的输出功率及失真度。与AB类放大器相比，CXAR41171具有高效能的特性。当电源电压3.6 V而输出负载为8Ω扬声器，输出功率400 mW时其效率为88%。在移动电话听筒及耳机的装置上，CXAR41171是能输出悦耳音调的音频功率放大器。CXAR41171的放大音量是允许由外部各音源独立控制的。CXAR41171采用TDFN以及WCSP封装。The CXAR41171 is a high efficiency, 3W mono class-D audio power amplifier. A low noise, filterless PWM architecture eliminates the output filter, reducing external component count, system cost, and simplifying design. Operating in a single 5V supply, CXAR41171 is capable of driving 4Ω speaker load at a continuous average output of 3W/10% THD+N or 2W/1% THD+N. The CXAR41171 has high efficiency with speaker load compared to a typical class AB amplifier. With a 3.6V supply driving an 8Ω speaker , the efficiency for a 400mW power level is 88%. In cellular handsets, the earpiece, speaker phone, and melody ringer can each be driven by the CXAR41171. The gain of CXAR41171 is externally configurable which allows independent gain control from multiple sources by summing signals from separate sources. The CXAR41171 is available in space-saving WCSP and TDFN packages.
产品特点 返回TOP
• 单一调变方案来减少EMI干扰
• 工作电压3.6V,负载8Ω的扬声器:
- 输出功率400mW时，效率高达88%
- 输出功率100mW时，效率高达80%
• 静态电流 2.4mA，关断电流0.5uA
• 工作电压2.5 V至5.5 V
• 采用优化的PWM输出架构，无需输出LC滤波器
• 高PSRR(-72dB)，无需稳压器
• 全差动设计用以抑制射频干扰，无需旁通电容
• 高CMRR，输入无需耦合电容器
• 内部工作频率250kHz
• 内含POP 及Click噪音抑制电路
• 1.5mmx1.5mm WCSP 及 3mmx3mm TDFN-8 封装
• 符合RoHS规范及Pb-Free
Unique Modulation Scheme Reduces EMI Emissions
Efficiency at 3.6V With an 8-Ω Speaker:
− 88% at 400 mW
− 80% at 100 mW
Low 2.4-mA Quiescent Current and
0.5-μA Shutdown Current
2.5V to 5.5V Wide Supply Voltage
Shutdown Pin Compatible with 1.8V Logic GPIO
Optimized PWM Output Stage Eliminates
LC Output Filter
Improved PSRR (−72 dB) Eliminates Need for a
Voltage Regulator
Fully Differential Design Reduces RF Rectification
and Eliminates Bypass Capacitor
Improved CMRR Eliminates Two Input
Coupling Capacitors
Internally Generated 250-kHz Switching
Frequency
Integrated Pop and Click Suppression Circuitry
1.5mm× 1.5mm Wafer Chip Scale Package (WCSP)
and 3mm× 3mm TDFN-8 package
RoHS compliant and 100% lead(Pb)-free
应用范围 返回TOP
• 无线或移动电话和PDA应用
Ideal for Wireless or cellular Handsets and PDAs
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
a
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品.......
|
音频放大器 > D类 > D类放大器 |
||||||||||
|
Part Number |
remark |
Vin (V) |
Speaker (W) |
Speaker (Ω) |
Headphone |
No of Speaker Channel |
THD +N @ 1KHz (%) |
IQ (mA)(Typ) |
PSRR (dB) |
Package |
|
10-W Inductor Free Stereo Audio Amplifier with Low EMI |
4.5~14.5 |
10 |
8 |
- |
2 |
0.07 |
22 |
60 |
TSSOP-28 |
|
|
2W High Efficiency Mono Class-D Audio Power Amplifier with Non-Clip |
3~5 |
2 |
8 |
N/A |
1 |
0.09 |
9 |
70 |
WCSP-16 |
|
|
2.8W/CH Stereo Filterless Class-D Audio Amplifier with |
2.7~5.5 |
2.8 |
4 |
110mW/32Ω |
2 |
0.2 |
6.5 |
60 |
SOP-24,TQFN-20 |
|
|
2.5W/CH Stereo Filterless Class-D Audio Amplifier with 64-Step DC Volume Control |
2.7~5.5 |
2.5 |
4 |
N/A |
2 |
0.2 |
6.5 |
60 |
SOP-16 |
|
|
3.3W Mono Class-D Audio Power Amplifier with Non-Clip, Power Limit and Noise Gate |
2.5~5.5 |
3.3 |
4 |
N/A |
1 |
0.15 |
4 |
70 |
WCSP-9 |
|
|
2.5-W/CH Stereo Filter-less Class-D Audio Power Amplifier with Auto-Recovery |
2.5 ~ 5.5 |
2.5 |
4 |
N/A |
2 |
0.13 |
6.2 |
63 |
TQFN-20,TSSOP-20 |
|
|
Low EMI, 2.8-W Mono Filterless Class-D Audio Power Amplifier with Auto-Recovery |
2.5~5.5 |
2.8 |
4 |
N/A |
1 |
0.1 |
41 |
68 |
SOP-8 |
|
|
Non-Clip, Low EMI, 2.8W Mono Filterless Class-D Audio Power Amplifier with Auto-Recovery |
2.5 ~ 5.5 |
2.8 |
4 |
N/A |
1 |
0.15 |
3.5 |
70 |
WCSP-9,TDFN-8 |
|
|
2.5W Stereo Class-D Audio Power Amplifier with 3D Enhancement |
2.5 ~ 5.5 |
2.5 |
4 |
N/A |
2 |
0.2 |
7.3 |
70 |
TQFN-24 |
|
|
3-W Mono Filterless Class-D Audio Power Amplifier |
2.5 ~ 5.5 |
3 |
4 |
N/A |
1 |
0.18 |
4.3 |
72 |
TDFN-8, WCSP |
|
|
6.5-W Mono Class-D Audio Power Amplifier |
8 ~ 24 |
6.5 |
8 |
N/A |
1 |
0.08 |
8 |
70 |
TSSOP-24 |
|
|
15-W Stereo Class-D Audio Power Amplifier with Speaker Protection |
5.5~26 |
15 |
8 |
- |
2 |
0.2 |
45 |
60 |
TSSOP-28 |
|
|
6-W Stereo Class-D Audio Power Amplifier with Speaker Protection |
5.5~26 |
6 |
8 |
N/A |
2 |
0.2 |
45mA |
60 |
TSSOP-28 |
|
用户评论