CXDR7588是一种经济高效的系统监控集成电路（IC），设计用于在数字和混合信号系统中监控VCC，并在系统电源超出工作范围时提供警告信号，必要时向主机处理器提供重置信号。不需要外部组件。复位输出在VCC通过复位电压阈值的20μs内被激活。VCC上升到重置阈值以上后，重置保持激活状态至少140毫秒。CXDR7588具有有效的低复位输出。CXDR7588的输出在VCC=1V时保证有效。CXDR7588经过优化，可排除VCC线路上的快速瞬态故障。18μA（VCC=3.3V）的低供电电流使这些设备适合于电池供电的应用。输出电压从1.7V到4.5V，增量为100mV。标准电压版本为2.63、2.93、3.08、4.0、4.38和4.63V
-
[ CXDR7588 ]
目录
7.相关产品
产品概述 返回TOP
The CXDR7588 is a cost-effective system supervisor Integrated Circuit (IC) designed to monitor VCC in digital and mixed signal systems and provide a warning signal when the system power supply is out of working range, and a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 20μsec of VCC falling through the reset voltage threshold. Reset is maintained active for a minimum of 140msec after VCC rises above the reset threshold. The CXDR7588 has an active-low RESET output. The output of the CXDR7588 is guaranteed valid down to VCC=1V. The CXDR7588 is optimized to reject fast transient glitches on the VCC line. Low supply current of 18μA (VCC=3.3V) makes these devices suitable for battery powered applications. The output voltages range from 1.7V to 4.5V in 100mV increments. Standard voltage versions are 2.63, 2.93, 3.08, 4.0, 4.38, and 4.63V
产品特点 返回TOP
¾ Precision VCC Monitor for 2.8V, 3.0V, 3.3V, and 5.0V Supplies
¾ 140msec Guaranteed Minimum RESET Output Duration
¾ RESET Output Guaranteed to VCC=1.0V
¾ Low 18μA Supply Current
¾ VCC Transient Immunity
¾ Small SOT-23 Package and TO-92 Package
¾ No External Components
¾ Wide Operating Temperature: 0°C to 85°C
应用范围 返回TOP
¾ Computers
¾ Embedded systems
¾ Battery powered equipment
¾ Critical μP power supply monitoring
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
Voltage detector/Reset（电压检测复位） |
|||||||
|
Product |
Status |
Vin |
VouT |
Output type |
IQ/IDIS |
Pkg |
Recommend |
|
Active |
6v |
4.63V,4.38V,4V,3.08V,2.93V 2.63V,2.3V |
CMOS |
7uA |
SOT23 |
Voltage Monitor（高电平有效） |
|
|
Active |
6v |
4.63V,4.38V,4V,3.08V,2.93V 2.63V,2.3V |
CMOS |
7uA |
SOT23 |
Voltage Monitor（高电平有效） |
|
|
Active |
6v |
4.63V,4.38V,4V,3.08V,2.93V 2.63V,2.3V |
CMOS |
7uA |
SOT23 |
Voltage Monitor（高电平有效） |
|
◀ 上一篇:开漏输出持续400毫秒CXDR7579长时间复位定时器固定延迟开放式漏极输出0.5mA的漏极电流能力DS启用测试模式带内部上拉电阻器的SR
下一篇▶:CXDR7589经济高效的系统监控集成电路在数字和混合信号系统中监控VCC在系统电源超出工作范围时提供警告信号必要时向主机处理器提供重置信号
