CXDR75111 CXDR75112 are microprocessor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems. High- and Low- voltage thresholds can be adjusted independently, allowing for wide hysteresis. Voltage detection thresholds are accurate to 2%. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below the low-voltage threshold, keeping it asserted for at least 140ms after VCC has risen above the high-voltage threshold. The CXDR75112L has an open-drain output stage, while the CXDR75111 have push-pull outputs. The GCXDR75112’s open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The GCXDR75111 have an active-low RESET output, while the GCXDR75111 has an active-high RESET output. The reset comparator is designed to ignore fast transients on threshold input. The IC’s power supply is separate from the detector inputs, allowing the CXDR75111/CXDR75112 to be powered from a down-stream supply. Low supply current (4μA, typical) makes the CXDR75111/CXDR75112 ideal for use in portable equipment. The CXDR75111/CXDR75112 are available in SOT -23-5 packages.
-
[ CXDR75111/2 ]
目录
7.相关产品
产品概述 返回TOP
The CXDR75111/CXDR75112 are microprocessor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems. High- and Low- voltage thresholds can be adjusted independently, allowing for wide hysteresis. Voltage detection thresholds are accurate to 2%. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below the low-voltage threshold, keeping it asserted for at least 140ms after VCC has risen above the high-voltage threshold. The CXDR75112L has an open-drain output stage, while the CXDR75111 have push-pull outputs. The GCXDR75112’s open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The GCXDR75111 have an active-low RESET output, while the GCXDR75111 has an active-high RESET output. The reset comparator is designed to ignore fast transients on threshold input. The IC’s power supply is separate from the detector inputs, allowing the CXDR75111/CXDR75112 to be powered from a down-stream supply. Low supply current (4μA, typical) makes the CXDR75111/CXDR75112 ideal for use in portable equipment. The CXDR75111/CXDR75112 are available in SOT -23-5 packages.
产品特点 返回TOP
„ ±2.5% Voltage Threshold Accuracy
„ Independently Adjustable High- and LowVoltage Thresholds
„ Fully Specified Over Temperature
„ Available in Three Output Configurations Push-Pull RESET Output (CXDR75111L) Push-Pull RESET Output (CXDR75111H) Open-Drain RESET Output (CXDR75112L)
„ 140ms min Power-On Reset Pulse Width
„ 4μA Supply Current
„ Power Supply Transient Immunity
„ SOT-23-5 Packages
应用范围 返回TOP
„ Computers
„ Controllers
„ Intelligent Instruments
„ Critical μP and μC Power Monitoring
„ Portable / Battery-Powered Equipment
„ Automotive
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
Part NO. |
VCC(V min |
VCC(V max |
Detecting Voltage(V) |
Manual |
Delay (ms) |
VthAcc uracy(%) |
Isupply (μA) |
Note |
Package |
|
1 |
5.5 |
2.93 |
N |
360 |
-- |
9 |
CXDR75101 is a Push-Pull Reset CXDR75102 is an OpenDrain Reset |
SOT23 |
|
|
1 |
5.5 |
3/3.3/5 |
Y |
360 |
2 |
10 |
Push-Pull Active-low RESET Output Manual Reset Input |
SOT143 |
|
|
1.1 |
5.5 |
2.25/2.63 2.93/4.55 |
Y |
200 |
2 |
10 |
CXDR75104/5/6 has a watchdog output CXDR75104/5 has MR# |
SOT23-5 |
|
|
1.1 |
5.5 |
2.25/2.63 2.93/4.55 |
Y |
200 |
2 |
10 |
Push-Pull Output,Dual outputs |
SOT23-5 |
|
|
1 |
5.5 |
2.6/2.9/3.1 3.3/3.9/4.3 |
N |
2 |
2 |
16.5 |
CXDR75108H/L is a Push-Pull High/Low Reset CXDR75109L is an Open-drain Low Reset |
SOT23 SC70-3 TO92/SOT89 |
|
|
1 |
5.5 |
2.3/2.5 |
N |
0.06 |
1.5 |
3.3 |
CXDR75110H is an Open-Drain High Reset CXDR75110L is an Open-Drain Low Reset |
SC70-4 SC82 SOT343 |
|
|
2.5 |
5.5 |
Individual Set by Resistor |
N |
140 |
2.5 |
4 |
CXDR75111H/L is a Push-Pull High/Low Reset CXDR75112L is an Open-Drain Low Reset |
SOT23-5 |
|
|
2.7 |
5.5 |
Individual Se tby Resistor |
Y |
200 |
2 |
18 |
CXDR75113H/L is a Push-Pull High/Low Reset CXDR75114L is an Open-Drain Low Reset |
SOT23-5 |
|
|
1 |
5.5 |
2.63/2.93/ 3.08/4.0/ 4.38/4.63 |
N |
140 |
2 |
10 |
CXDR75115H/L is a Push-Pull High/Low Reset CXDR75116L is an Open-Drain Low Reset |
SOT23 SC70-3 |
|
|
1 |
5.5 |
2.64/2.91/3.1 3.96/4.32/4.6 |
Y |
230 |
2 |
14 |
CXDR75117H/L is a Push-Pull High/Low Reset CXDR75118L is an Open-Drain Low Reset |
SOT25 SC70-5 SOT143 |
