CXDR75122 CXDR75123 are microprocessor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems. They provide excellent circuit reliability and low cost and adjustments when used with +2.5V, +3.0V powered circuits. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, with hysteresis keeping it asserted for time delay determined by externally programmable time delay generator after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available. The CXDR75123L has an open-drain output stage, while the CXDR75122 have push-pull outputs. The CXDR75123’s open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The CXDR75122 have an active-low RESET output, while the CXDR75122 has an active-high RESET output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 0.8V. Low supply current makes the CXDR75122/CXDR75123 ideal for use in portable equipment. The CXDR75122/CXDR75123 are available in 5-pin SOT-23-5 and 6 pin TDFN2X2 packages.
-
[ CXDR75122/3 ]
目录
7.相关产品
产品概述 返回TOP
The CXDR75122/CXDR75123 are microprocessor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems. They provide excellent circuit reliability and low cost and adjustments when used with +2.5V, +3.0V powered circuits. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, with hysteresis keeping it asserted for time delay determined by externally programmable time delay generator after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available. The CXDR75123L has an open-drain output stage, while the CXDR75122 have push-pull outputs. The CXDR75123’s open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The CXDR75122 have an active-low RESET output, while the CXDR75122 has an active-high RESET output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 0.8V. Low supply current makes the CXDR75122/CXDR75123 ideal for use in portable equipment. The CXDR75122/CXDR75123 are available in 5-pin SOT-23-5 and 6 pin TDFN2X2 packages.
产品特点 返回TOP
„ Precision Monitoring of +2.5V and +3V Power-Supply Voltages
„ Fully Specified Over Temperature
„ Available in Three Output Configurations Push-Pull RESET Output (CXDR75122L) Push-Pull RESET Output (CXDR75122H) Open-Drain RESET Output (CXDR75123L)
„ Externally Programmable Time Delay Generator
„ 14μA Supply Current
„ Guaranteed Reset Valid to VCC = 0.8V
„ Power Supply Transient Immunity
„ 5 pin SOT-23-5 and 6 pin TDFN2X2 Packages
„ 2% Threshold Accuracy
应用范围 返回TOP
„ Computers
„ Controllers
„ Intelligent Instruments
„ Critical μP and μC Power Monitoring
„ Portable / Battery-Powered Equipment
„ Automotive
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
Delay Time Adjustable |
|||||||||
|
Part NO. |
VCC(V min. |
VCC(V max. |
Detecting Voltage(V) |
ICD source (μA) |
VTCD (V) |
Vth Accu racy(%) |
Isupply (μA) |
Note |
Package |
|
2.2 |
5.5 |
0.8*VCC |
1.1 |
0.833 |
-- |
4 |
Open-Drain RESET Output TMR(ms) =76000×CMR(uF) |
ADFN1.5X 1.5-6 |
|
|
0.8 |
5.5 |
2.2/3.7 |
0.18 |
-- |
2 |
29 |
CXDR75120H/L is a Push-Pull High/Low Reset CXDR75121L is an Open-Drain Low Reset TCD(ms)=5700×CD(uF) |
TSOT25 |
|
|
0.8 |
5.5 |
2.0/2.2/2.4 |
0.09 |
0.5 |
2 |
35 |
CXDR75122H/L is a Push-Pull High/Low Reset CXDR75123L is an Open-Drain Low Reset TCD(ms)=6740×CD(uF) |
SOT25 TDFN2X2-6 |
|
|
1 |
5.5 |
2.6/2.9/3.1 3.3/3.9/4.34.6 |
0.67 |
1.25 |
2 |
14 |
CXDR75124L is a Push-Pull LowReset CXDR75125L is an Open-Drain Low Reset TCD(ms)=1860×CD(uF)TMR(ms) =88000×CMR(uF) |
SOT26 ADFN1.5X 1.5-6 |
|
|
2.7 |
5.5 |
Individual Set by Resistor |
-- |
0.788 |
2 |
12 |
CXDR75126H/L is a Push-Pull High/Low Reset CXDR75127L is an Open-Drain Low Reset TCD(ms)=2700×CD(uF) |
SOT25 SC70-5 DFN1.6X1.6-6 ADFN1.5X1.5-6 |
|
|
0.8 |
5.5 |
2.5/2.6/2.93.1/3.3/4.04.3/4.6 |
0.88 |
1.25 |
2 |
14 |
CXDR75128H/L is a Push-Pull High/Low Reset CXDR75129L is an Open-Drain Low Reset TCD(ms)=1685×CD(uF) |
SOT25 TSOT23-5 |
|
