CXPR7145D产品是锂离子/聚合物的高集成度解决方案电池保护。CXPR7145D包含先进的功率MOSFET，高精度电压检测电路和延迟电路。CXPR7145D被放入一个超小型DFN2X2-6包中，并且只有一个外部组件使其成为电池组有限空间的理想解决方案。CXPR7145D具有电池应用所需的所有保护功能包括过充、过放、过流、负载短路保护等。精确的过充检测电压确保安全和充分利用率充电。低待机电流从电池中排出少量电流，而存储中。该设备不仅面向数字蜂窝电话，还面向任何其他需要锂离子和锂聚电池供电的信息设备长期电池寿命。
-
[ 产品资料下载 ]
|
目录 1.产品概述 2.产品特点 一,产品概述(General Description) battery protection. detection circuits and delay circuits. CXPR7145D is put into an ultra-small DFN2X2-6 package and only one including overcharging, overdischarging, overcurrent and load short circuiting rotection etc. The accurate overcharging detection voltage ensures safe and full utilization charging.The low standby current drains little current from the cell while in storage.The device is not only targeted for digital cellular phones, but also for any other Li-Ion and Li-Poly battery-powered information appliances requiring long-term battery life. 二.产品特点(Features) |
|
NUMBER |
PIN NAME |
PIN DESCRIPTION |
|
1 |
VDD |
Power Supply |
|
2，3 |
GND |
Ground, connect the negative terminal of the battery to this pin |
|
4，5，6 |
VM |
The negative terminal of the battery pack. The internal FET switch |
|
7 |
EPAD |
Please connect EPAD with mass metal GND |
五,电路原理图
六.产品PDF文档
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
七,功能概述
The CXPR7145D monitors the voltage and current of a battery and protects it from being damaged due to overcharge voltage,overdischarge voltage, overdischarge current, and short circuit conditions by disconnecting the battery from the load or charger. These functions are required in order to operate the battery cell within specified limits.
The device requires only one external capacitor. The MOSFET is integrated and its RDS(ON) is as low as 45mΩ typical.
八,相关产品 更多同类产品......
|
小过放电流/二合一锂电保护IC |
|||||||||||
|
型号 |
耐压 |
工作 电流 |
过充 电压 |
过充释 放电流 |
过放 电压 |
过放释 放电压 |
过放 自恢复 |
过流 保护 |
短路 保护 |
封装 |
说明 |
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
||
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
cost down版本 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-23 |
cost down版本 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.9V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
||
|
6.0V |
2.8uA |
4.425V |
4.25V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
4.35V锂电池保护应用 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
SOT-25 |
cost down版本 |
|
|
10.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/2.5A |
OK |
SOT-26 |
||
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.8V |
3.0V |
OK |
OK/0.9A |
OK |
SOT-25 |
小过放电流/保护应用 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.8V |
3.0V |
OK |
OK/0.9A |
OK |
DFN2*2-6 |
小过放电流/保护超薄应用 |
|
|
6.0V |
2.8uA |
4.425V |
4.25V |
2.8V |
3.0V |
OK |
OK/0.9A |
OK |
DFN2*2-6 |
4.35V电芯/小过放电流/保护超薄 |
|
|
6.0V |
2.8uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
DFN2*2-6 |
电子烟等超薄应用 |
|
|
6.0V |
2.8uA |
4.25V |
4.1V |
2.9V |
3.0V |
OK |
OK/3A |
OK |
DFN2*2-6 |
电子烟等超薄应用 |
|
|
6.0V |
3.9uA |
4.3V |
4.10V |
2.4V |
3.0V |
OK |
OK/9A |
OK |
DFN1.8*1.4 |
电子烟等 |
|
|
8.0V |
3uA |
4.3V |
4.1V |
2.4V |
3.0V |
OK |
OK/3A |
OK |
DFN-5L |
电子烟等超薄应用 |
|
|
8.0V |
3uA |
4.4V |
4.2V |
2.8V |
3.0V |
OK |
OK/4A |
OK |
DFN-5L |
4.35V电芯保护超薄应用 |
|
◀ 上一篇:CXPR7145A过温过充电流过电流检测过放电电流负载短路充电器检测0V电池充电功能延迟时间低电流消耗充电器反接电池反接保护
下一篇▶:CXPR7146A功率MOSFET高精度电压检测延迟电路电池反接保护0V电池充电功能内部产生延迟时间低电流消耗
| 热门信息 |
|---|
| 最新信息 |
|---|
| 推荐信息 |
|---|
