CXHA3120是一个带有锁存数字输出的霍尔传感器。适用于无刷直流电动机的电子换相应用。CXHA3120使用斩波放大器进行磁信号放大，可以实现低偏移，从而精确的磁开关阈值。
如果磁通密度大于防喷器阈值，则开启（低）。保持输出状态，直到磁通密度反转低于Brp，导致NO关闭（高）
˙最大输出汇电流50mA
˙排水明沟预驱动
˙电源反极性保护
-
[ CXHA3120 ]
目录
1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载（PDF文档）
一.产品概述
CXHA3120 is a Hall sensor with latched digital output. It’s suitable for electronic commutation of brushless DC motor applications. The CXHA3120 uses a chopper amplifier for magnetic signal amplification, which can achieve a low offset and thus precise magnetic switching thresholds.
If a magnetic flux density larger than threshold Bop,NO is turned on(low). The output state is held until a magnetic flux density reversal falls below Brp causing NO to be turned off (high)
二.产品特点
˙Maximum output sink current 50mA
˙Open-drain pre-driver
˙Power reverse polarity protection
˙Available in SIP-3L, SOT23(CXHA3120) package
三.应用范围
Motor Driver
四.技术规格书（产品PDF)
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
五.产品封装图
六.电路原理图
七.相关芯片选择指南
| HALL EFFECT SENSOR E-BIKE App.电动车应用霍尔效应传感器 | |||||||
| Part No. | VIN | IOUT | Operating | Package | Status | Notes | |
| (Min) | (Max) | Temperature(℃) | |||||
| (V) | (V) | (mA) | |||||
| CXHA3118 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3119 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3120 | 2.4 | 16 | 50 | -20 to 105 | SIP-3L、SOT23 | MP | E-Bike App. |
| CXHA3121 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | E-bike Motor Hall Sensor |
| CXHA3122 | 2.7 | 7 | -20 to 85 | SIP-3L | MP | Linear Hall Sensor 1.3mV/G / E-Bike App. | |
| CXHA3123 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L 、SOT23 | MP | Hall Switch for E-Bike App. |
| CXHA3124 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L SOT23 | MP | Hall Switch for E-Bike App. |
◀ 上一篇:CXHA3119宽工作电压3.0V至28V输出电流50mA反极性保护霍尔效应锁存传感器无刷直流电机应用电子换相而设计内部带隙稳压器温度补偿电源电压
下一篇▶:CXHA3121霍尔效应锁存传感器无刷直流电机应用的电子换流而设计磁感应的片内霍尔电压发生器放大霍尔电压的比较器开关磁滞以抑制噪声的施密特触发器
| 热门信息 |
|---|
| 最新信息 |
|---|
| 推荐信息 |
|---|
