CXAS42270在1.5V到5.5V的输入电压下工作，适用于1.8V、3V和5V系统。输入逻辑电平与TTL和2.5V至5V CMOS兼容。典型的静态电源电流为4μA。在关机模式下，电源电流减小到小于1μA。CXAS42270采用6针TDFN 1.6X1.6mm封装。CXAS42270是一个单P通道MOSFET电源开关，专为高压侧负载切换应用而设计。MOSFET在VCC=5V时具有典型的80mΩRDS（ON），允许在低正向电压降下增加负载开关电流处理能力。CXAS42270有一个回转率限制接通负载开关，并提供一个连接到OUT的停机负载放电引脚，以便在开关禁用时快速断开负载电路。
1.5V至5.5V输入电压范围
·非常低的RDS（开），通常为80mΩ（5V）
·回转率限制开启时间1毫秒（5伏）
快速卸荷销
TTL/CMOS输入逻辑电平
-
[ CXAS42270 ]"
目录
7.相关产品
产品概述 返回TOP
The CXAS42270 operates with an input voltage from 1.5V up to 5.5V. It is suitable for 1.8V, 3V and 5V systems. Input logic levels are TTL and 2.5V to 5V CMOS compatible. The typical quiescent supply current is 4μA. In shutdown mode, the supply current decreases to less than 1μA. The CXAS42270 is available in a 6 pin TDFN 1.6X1.6mm package.The CXAS42270 is a single P-channel MOSFET power switch designed for high-side load-switching applications. The MOSFET has a typical RDS(ON) of 80mΩ at VCC=5V, allowing increased load switch current handling capacity with a low forward voltage drop. The CXAS42270 has a slew rate limited turn-on load switch and offers a shutdown load discharge pin connected to OUT to rapidly turn off a load circuit when the switch is disabled.
产品特点 返回TOP
„ 1.5V to 5.5V Input Voltage Range
„ Very Low RDS(ON), Typically 80mΩ (5V)
„ Slew Rate Limited Turn-On Time 1ms (5V)
„ Fast Load Discharge Pin
„ TTL/CMOS Input Logic Level
„ TDFN1.6X1.6-6 Package
应用范围 返回TOP
„ Cellular Telephones
„ Digital Still Cameras
„ Hot Swap Supplies
„ Notebook Computers
„ Personal Communication Devices
„ Personal Digital Assistants (PDAs)
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
Single Power Switch |
|||||||||
|
Part NO. |
Vin(V) min. |
Vin(V) max. |
RON (Ohm) |
VOUT rising (μs) |
Ilimit (A) |
OC Flag |
Discharge (Ohm) |
Note |
Package |
|
1 |
3.6 |
25 |
140 |
1 |
N |
80 |
RON = 56m ohm@VIN = 1.2V |
WLCSP2X2-4 |
|
|
1 |
3.6 |
78 |
48/220 |
0.5 |
N |
88/N |
RON = 146m ohm@VIN = 1.2V |
WLCSP2X2-4 |
|
|
1.5 |
5 |
25 |
130 |
3 |
N |
250 |
RON = 68m ohm@VIN = 1.5V |
WLCSP2X2-4 |
|
|
1.5 |
5.5 |
20 |
3300 |
3 |
N |
N |
RON = 48m ohm@VIN = 1.5V |
WLCSP2X3-6 |
|
|
0.6 |
5.5 |
12 |
ADJ |
12 |
N |
150 |
HV Vbias Needs |
ADFN2X2-8 |
|
|
2.7 |
5.5 |
120 |
150 |
2 |
N |
75 |
N/A |
SOT-23-5 |
|
|
2.7 |
5.5 |
120 |
1900 |
2 |
N |
75 |
SS |
SOT-23-5 |
|
|
2.7 |
5.5 |
120 |
1900 |
2.5 |
N |
R |
SS,External discharging |
SOT-23-5/ADFN1.5X1.5-6 |
|
|
2.7 |
5.5 |
70 |
1400 |
1 |
Y |
130 |
N/A |
SOT-23-5 |
|
|
2.7 |
5.5 |
90 |
1200 |
ADJ |
-- |
-- |
-- |
SOT-23-5 |
|
|
2.7 |
5.5 |
90 |
1500 |
ADJ |
Y |
N |
SS, OC Setting by a R |
SOP-8/TDFN2X2-6/ MSOP-8 |
|
|
2 |
5.5 |
80 |
2500 |
2.5 |
N |
153 |
Turn on delay 800us |
TDFN2X2-8 |
|
|
2 |
5.5 |
85 |
1500 |
2.5 |
N |
153 |
Turn on delay 800us |
SOT-23-5 |
|
|
1.5 |
5.5 |
80 |
1000 |
-- |
N |
R |
External discharging |
TDFN1.6X1.6-6 |
|
|
2.7 |
5.5 |
70 |
1000 |
1.2 |
Y |
N |
SS, Fast SCP, HML 2.0 VOUT Reverse-Voltage Protection |
SOT-23-6 |
|
|
2.7 |
5.5 |
70 |
1000 |
3.3 |
Y |
N |
N/A |
MSOP-8 |
|
|
2.7 |
5.5 |
70 |
1000 |
1.5 |
Y |
N |
N/A |
SOP-8 |
|
|
2.7 |
5.5 |
125 |
1500 |
0.45 |
Y |
75 |
N/A |
SOP-8 |
|
|
2.7 |
5.5 |
70 |
1500 |
2.5 |
Y |
70 |
N/A |
SOP-8/MSOP-8/ TDFN3X3-8 |
|
|
0.6 |
5.5 |
5.5 |
ADJ |
10 |
N |
150 |
Need a 5V Bbias, A/B/C = 5.5/11/22 m ohm; 10A/6A/4A |
TDFN3X3-8/MSOP-8(FD)/SOT-23-6 |
|
