CXAR41174为一款高效率，2通道全桥式驱动（BTL）D类音频放大器。CXAR41174B能够给8Ω的负载提供持续的6W每通道的输出功率，并且THD+N为10%。CXAR41174B其内部采用全差动输入设计，比起单端输入更能有效抑制噪声。利用G0和G1连个引脚，可以选择放大器增益为20，26，32或是36dB。改进的EMI抑制技术使得在输出端可以使用廉价的铁氧体磁珠，同时满足电磁兼容性（EMC）要求。CXAR41174B内置扬声器保护电路，以限制流过扬声器的电流值。同时AGC可以检测出由于输入信号过大而引起的输出信号clip并自动抑制clip。CXAR41174B提供短路保护和过热保护，以避免芯片的损毁。
‧工作电压：5.5V到26V
‧独特的调制方式减少EMI干扰
‧负载8Ω，工作电压10V，单一通道输出功率可达6W
‧负载4Ω，工作电压10V，单一通道输出功率可达12W
‧效率高达87%D类操作模式可以降低热消耗
‧四种可选增益
‧全差分输入
‧扬声器保护电路
‧自动增益控制（AGC）和功率限制
‧具有过温及短路保护机制
-
[ CXAR41174 ]
目录
7.相关产品
产品概述 返回TOP
CXAR41174B 为一款高效率，2通道全桥式驱动（BTL）D类音频放大器。CXAR41174B能够给8Ω的负载提供持续的6W每通道的输出功率，并且THD+N为10%。CXAR41174B其内部采用全差动输入设计，比起单端输入更能有效抑制噪声。利用G0和G1连个引脚，可以选择放大器增益为20，26，32或是36dB。改进的EMI抑制技术使得在输出端可以使用廉价的铁氧体磁珠，同时满足电磁兼容性（EMC）要求。CXAR41174B内置扬声器保护电路，以限制流过扬声器的电流值。同时AGC可以检测出由于输入信号过大而引起的输出信号clip并自动抑制clip。CXAR41174B提供短路保护和过热保护，以避免芯片的损毁。CXAR41174B采用28-pin TSSOP封装。The CXAR41174B is a high efficiency, 2 channel bridged-tied load (BTL), class-D audio power amplifier. Operating from a 10V power supply, CXAR41174B is capable of delivering 6W/ channel of continuous output power to a 8Ω load with 10% THD+N. The CXAR41174B features a differential input architecture offering improved noise immunity over a single-ended (SE) input amplifier. Amplifier gain is internally configured and can be selected to 20, 26, 32 or 36dB utilizing the G0 and G1 gain select pins. Advanced EMI suppression technology enables the use of inexpensive ferrite bead at the outputs while meeting EMC requirements. The speaker protection circuitry is integrated into CXAR41174B to limit the amount of current through the speaker. Meanwhile, the AGC detects output signal clip due to the over level input signal and suppresses it automatically. The CXAR41174 also features short-circuit and thermal protection preventing the device from being damaged during a fault condition. The CXAR41174 is available in thermally efficient 28-pin TSSOP package.
产品特点 返回TOP
‧工作电压：5.5V到26V
‧独特的调制方式减少EMI干扰
‧负载8Ω，工作电压10V，单一通道输出功率可达6W
‧负载4Ω，工作电压10V，单一通道输出功率可达12W
‧效率高达87%D类操作模式可以降低热消耗
‧四种可选增益
‧全差分输入
‧扬声器保护电路
‧自动增益控制（AGC）和功率限制
‧具有过温及短路保护机制
‧28-pin TSSOP封装
‧符合RoHS规范及Pb-Free
Wide Supply Voltage: 5.5V to 26V
Unique Modulation Scheme Reduces EMI Emission
6-W/ch into an 8- Load From a 10-V Supply
12W into a 4- Mono Load From a 10-V Supply
87% Efficient Class-D Operation Eliminates
Need for Heat Sinks
Four Selectable, Gain Settings
Differential Inputs
Speaker Protection Circuitry
Auto Gain Control and Power Clamp
Thermal and Short-Circuit Protection
28-pin TSSOP Package with Thermal Pad
RoHS compliant and 100% lead(Pb)-free
Halogen-Free
应用范围 返回TOP
‧电视 Televisions
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
a
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品.......
|
音频放大器 > D类 > D类放大器 |
||||||||||
|
Part Number |
remark |
Vin (V) |
Speaker (W) |
Speaker (Ω) |
Headphone |
No of Speaker Channel |
THD +N @ 1KHz (%) |
IQ (mA)(Typ) |
PSRR (dB) |
Package |
|
10-W Inductor Free Stereo Audio Amplifier with Low EMI |
4.5~14.5 |
10 |
8 |
- |
2 |
0.07 |
22 |
60 |
TSSOP-28 |
|
|
2W High Efficiency Mono Class-D Audio Power Amplifier with Non-Clip |
3~5 |
2 |
8 |
N/A |
1 |
0.09 |
9 |
70 |
WCSP-16 |
|
|
2.8W/CH Stereo Filterless Class-D Audio Amplifier with |
2.7~5.5 |
2.8 |
4 |
110mW/32Ω |
2 |
0.2 |
6.5 |
60 |
SOP-24,TQFN-20 |
|
|
2.5W/CH Stereo Filterless Class-D Audio Amplifier with 64-Step DC Volume Control |
2.7~5.5 |
2.5 |
4 |
N/A |
2 |
0.2 |
6.5 |
60 |
SOP-16 |
|
|
3.3W Mono Class-D Audio Power Amplifier with Non-Clip, Power Limit and Noise Gate |
2.5~5.5 |
3.3 |
4 |
N/A |
1 |
0.15 |
4 |
70 |
WCSP-9 |
|
|
2.5-W/CH Stereo Filter-less Class-D Audio Power Amplifier with Auto-Recovery |
2.5 ~ 5.5 |
2.5 |
4 |
N/A |
2 |
0.13 |
6.2 |
63 |
TQFN-20,TSSOP-20 |
|
|
Low EMI, 2.8-W Mono Filterless Class-D Audio Power Amplifier with Auto-Recovery |
2.5~5.5 |
2.8 |
4 |
N/A |
1 |
0.1 |
41 |
68 |
SOP-8 |
|
|
Non-Clip, Low EMI, 2.8W Mono Filterless Class-D Audio Power Amplifier with Auto-Recovery |
2.5 ~ 5.5 |
2.8 |
4 |
N/A |
1 |
0.15 |
3.5 |
70 |
WCSP-9,TDFN-8 |
|
|
2.5W Stereo Class-D Audio Power Amplifier with 3D Enhancement |
2.5 ~ 5.5 |
2.5 |
4 |
N/A |
2 |
0.2 |
7.3 |
70 |
TQFN-24 |
|
|
3-W Mono Filterless Class-D Audio Power Amplifier |
2.5 ~ 5.5 |
3 |
4 |
N/A |
1 |
0.18 |
4.3 |
72 |
TDFN-8, WCSP |
|
|
6.5-W Mono Class-D Audio Power Amplifier |
8 ~ 24 |
6.5 |
8 |
N/A |
1 |
0.08 |
8 |
70 |
TSSOP-24 |
|
|
15-W Stereo Class-D Audio Power Amplifier with Speaker Protection |
5.5~26 |
15 |
8 |
- |
2 |
0.2 |
45 |
60 |
TSSOP-28 |
|
|
6-W Stereo Class-D Audio Power Amplifier with Speaker Protection |
5.5~26 |
6 |
8 |
N/A |
2 |
0.2 |
45mA |
60 |
TSSOP-28 |
|
◀ 上一篇:CXAR41173高效率2通道全桥式驱动BTL D类音频放大器在工作电压为16V输出负载为8Ω的扬声器上通道输送出15W/10%的输出功率及失真度全差动输入设计比起单端输入更能有效抑制噪声
下一篇▶:CXAR41175是20W 4通道半桥式驱动的高效数字音频功率放大器外部时钟信号驱动I2S串行数据输入接口允许同时处理两个分离声道无缝整合到大多数的数字音频处理器器件接收很宽范围的输入数据和数据速率
| 热门信息 |
|---|
| 最新信息 |
|---|
| 推荐信息 |
|---|
| 相关文章 |
|---|
| 无相关信息 |
