CXAR41275是MSOP-8（FD）、TDFN3X3-8和WLCSP2X4-8封装中的单声道音频功率放大器。在5V电源电压下，可驱动2W连续均方根功率以桥连负载（BTL）方式进入4Ω负载。在上述操作条件下，其THD小于1%。对于低电流消耗应用程序，支持SHDN模式以在CXAR41275空闲时禁用它。电流消耗可以进一步降低到1μA以下。使停机引脚处于低电平将驱动CXAR41275进入停机状态。
Depop电路集成
·2.7V至5.5V操作
·10%THD+N时的输出功率，VDD=5V
--3Ω负载下为2.6W（典型值）
·1%THD+N时的输出功率，VDD=5V
--2W（典型）到4Ω负载
--8Ω负载时为1.3W（典型值）
单桥捆绑荷载（BTL）
·关闭控制可用
-
[ CXAR41275 ]"
目录
7.相关产品
产品概述 返回TOP
The CXAR41275 is a mono audio power amplifier in MSOP-8 (FD), TDFN3X3-8 and WLCSP2X4-8 package. It can drive 2W continuous RMS power into 4Ω load in Bridge- Tied Load (BTL) mode at 5V supply voltage. Its THD is smaller than 1% under the above operation condition. For the low current consumption applications, the SHDN mode is supported to disable the CXAR41275 when it is idle. The current consumption can be further reduced to below 1μA. Giving the SHUTDOWN pin low level will drive the CXAR41275 entering the shutdown.
产品特点 返回TOP
„ Depop Circuitry Integrated
„ 2.7V to 5.5V Operation
„ Output Power at 10% THD+N, VDD=5V
--2.6W (typical) into a 3Ω Load
„ Output Power at 1% THD+N, VDD=5V
--2W (typical) into a 4Ω Load
--1.3W (typical) into a 8Ω Load
„ Mono Bridge-Tied Load (BTL)
„ Shutdown Control Available
„ MSOP-8 (FD) , TDFN3X3-8 Package & WLCSP2X4-8 Available
应用范围 返回TOP
„ PDAs
„ Portable Devices
„ Notebook
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
a
相关芯片选择指南 返回TOP 更多同类产品。。。。。。。
|
Mono Audio Amplifier |
||||||||
|
Part NO. |
VDD (V)min. |
VDD (V)max. |
POUT THD=1% (W,Ohm) |
POUT(mW) THD=10% (W,Ohm) |
Gain setting |
Enable Active |
Note |
Package |
|
2.7 |
5.5 |
2, 4 |
2.6, 3 |
ADJ |
High |
BTL,OTP, De-pop |
MSOP-8/TDFN3X3-8 |
|
|
2.7 |
5.5 |
2, 4 |
2.6, 3 |
ADJ |
High |
BTL, OTP, De-pop |
MSOP-8(FD)/TDFN3X3-8 |
|
|
2.8 |
5.5 |
2, 4 |
2.5, 4 |
ADJ |
High |
BTL,De-pop, Class D |
WLCSP3X3-9 |
|
