• [ CXAS4232B ]"

产品订购

                          目录bhM嘉泰姆

   1.产品概述      2.产品特点      3.应用范围     4.技术规格书下载（PDF文档）bhM嘉泰姆

   5.产品封装      6.电路原理图     7.相关产品bhM嘉泰姆

一.产品概述bhM嘉泰姆

    The CXAS4232B is an audio jack detection switch for CITA and OMTP 4-pole accessories. The pin MIC is on audio key side, as CXAS4232B' O1/O2 is plugged into audio jack of cell phone, it will detect the locations of ground (GND) and microphone (MIC) poles on the audio plug and automatically routes them to the appropriate connections. bhM嘉泰姆

   The MIC switch' Ron is 5 Ω (typical) while the Ground switch has a low Ron of 0.5 Ω (typical) to minimize voltage drop across it, preventing undesired increase in ground reference voltage. bhM嘉泰姆

   As VCC is power-up, CXAS4232B is enabled and it consumes ultra-low quiescent current, less than 600nA (typical). The range of signal swing in transmission can be rail-to-rail (0~VCC), even CXAS4232B can tolerate signal swing higher than VCC but less than VCC+3V with very little inverse leakage into VCC supply and not any damage of the device. The speed of signal is recommended not more than 300KHz. bhM嘉泰姆

   The CXAS4232B is available in SOT-353 package. Standard product is Pb-Free and halogen-Free.  bhM嘉泰姆

二.产品特点bhM嘉泰姆

  Supply voltage range : 2.3 ~ 5.5VbhM嘉泰姆

  Detects polarity of GND and MIC on 4-pole plugsbhM嘉泰姆

  Automatically routes GND and MIC to audio jack terminalsbhM嘉泰姆

  low RDSON for MIC Switch (5 Ω) and GND switch (0.5 Ω)bhM嘉泰姆

  Ultra-Low quiescent current, < 600nA (typical)bhM嘉泰姆

  ESD Rating (MIL-STD-883J / Method 3015.8)bhM嘉泰姆

  IO to GND : ±8KVbhM嘉泰姆

  Power to GND : ±8KVbhM嘉泰姆

三.应用范围bhM嘉泰姆

 Mobile Audio Key    bhM嘉泰姆

四.技术规格书（产品PDF)bhM嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！bhM嘉泰姆

 bhM嘉泰姆

五.产品封装图bhM嘉泰姆

  bhM嘉泰姆

六.电路原理图bhM嘉泰姆

   bhM嘉泰姆

七.相关芯片选择指南   更多同类产品......bhM嘉泰姆

◀ 上一篇:CXAS4231D用于交换耳机接口上的接地和麦克风连接合闸前断开扩展控制输入范围内的低静态电流电源电压2.3~5.0V

返回顶部

下一篇▶:CXAS4233Q高性能双单刀单掷SPST模拟开关有负摆幅音频功能在3.6V VCC下具有1Ω的低Ron在3.3V到4.5V的宽VCC范围内工作为高压隔离而设计智能电路控制电压低于VCC电源电压