CXAS42211是由16个单通道组成的高速单片模拟多路复用器。根据4位二进制地址行(A0、A1、A2和A3)的确定,CXAS42211将16个输入中的一个切换到公共输出。EN输入启用或禁用设备。禁用时,所有通道都将关闭;启用时,每个通道在两个方向上的传导都一样良好,并且具有延伸到电源的输入信号范围。这些开关的24Ω导通电阻和12Ω导通电阻平坦度使它们成为低失真至关重要的数据采集和增益开关应用的理想解决方案。
•24Ω典型接通电阻
•12Ω电阻平坦度
•±3.3V至±6.6V双电源操作
•3.3V至13.2V单电源操作
•-3dB带宽:80MHz
•轨对轨运行
-
[ CXAS42211 ]"
目录
7.相关产品
产品概述 返回TOP
The CXAS42211 is a high speed monolithic analog multiplexer comprising of 16 single channels. The CXAS42211 switches one of 16 inputs to a common output, as determined by the 4-bit binary address lines (A0, A1, A2 and A3). An EN input enables or disables the device. When disabled, all channels switch off; when enabled, each channel conducts equally well in both directions and has an input signal range that extends to the supplies.
The 24Ω on-resistance and 12Ω on-resistance flatness of these switches make them ideal solutions for data acquisition and gain switching applications where low distortion is critical.
The CXAS42211 is available in Green TQFN-5×5-32L and TSSOP-28 packages. It operates over an ambient temperature range of -40℃ to +85℃.
产品特点 返回TOP
• 24Ω Typical On-Resistance
• 12Ω On-Resistance Flatness
• ±3.3V to ±6.6V Dual Supply Operation
• 3.3V to 13.2V Single Supply Operation
• -3dB Bandwidth: 80MHz
• Rail-to-Rail Operation
• -40℃ to +85℃ Operating Temperature Range
• Available in Green TQFN-5×5-32L and TSSOP-28 Packages
应用范围 返回TOP
Communication Systems
Medical Systems
Audio Signal Routing
Video Signal Routing
Automatic Test Equipment
Data Acquisition Systems
Battery-Powered Systems
Sample-and-Hold Systems
Relay Replacements
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
产品封装图 返回TOP
电路原理图 返回TOP
a
相关芯片选择指南 返回TOP 更多同类产品......
特殊开关系列 |
||||||||
Part Number |
Feature |
VCC (Min)V |
VCC (Max)V |
-3dB Bandwidth |
Interface |
RON (Ω) |
Crosstalk (-dB) |
Package |
12x9,Buffered |
3.1 |
5.5 |
84 |
I2C |
74 |
SSOP-28 TSSOP-28 |
||
8x6, Buffered |
3.1 |
5.5 |
88 |
I2C |
77 |
TSSOP-24 |
||
SIM I/F Swap |
1.8 |
5.5 |
400 |
I/O |
80 |
TQFN-3x3-20L |
||
4-2:2, Passive Swap |
1.8 |
5.5 |
400 |
I/O |
12 |
80 |
TQFN-3x3-20L |
|
Six Channels 1:2 Multiplexer |
2 |
5 |
450 |
I/O |
8.5 |
55 |
TSSOP-24 TQFN-4x4-24L |
|
16x4,Passive |
2.7 |
5.5 |
120 |
I2C |
30 |
110 |
TSSOP-28 TQFN-4x4-28L |
|
16x8 Passive |
2.7 |
5.5 |
120 |
I2C |
30 |
110 |
TQFN-5x5-32L LQFP-7x7-32L |
|
1:16, Multiplexer |
3.3 |
13.2 |
80 |
I/O |
24 |
70 |
TQFN-5x5-32L TSSOP-28 |
|
Dual 1:8, Multiplexer |
3.3 |
13.2 |
135 |
I/O |
24 |
70 |
TQFN-5x5-32L TSSOP-28 |
|
High Speed, 16x8, Passive, I2C Interface |
2.7 |
5.5 |
250 |
I2C |
30 |
110 |
LQFP-7x7-32L |
|
1:8, Multiplexer |
3.3 |
13.2 |
80 |
I/O |
24 |
70 |
TSSOP-16 |
|
16x8, Passive |
4.5 |
13.2 |
45 |
I/O |
40 |
47 |
LQFP-10x10-44L PLCC-44L |
|
High Speed, 16x8, Passive, Serial Digital Interface |
2.7 |
5.5 |
250 |
SPI |
28 |
55 |
LQFP-7x7-32L |
|
High Speed, 2:1 32-Bit Bus Multiplexer |
3.3 |
5 |
100 |
I/O |
11 |
60 |
LQFP-14x14-100L |
|
High Speed, 3-1:3Multiplexer |
2.5 |
5.5 |
350 |
I/O |
7 |
60 |
TQFN-3x3-20L TSSOP-20 |
|
High Speed, 2-1:3 Multiplexer |
2.7 |
4.3 |
380/400 |
I/O |
4/9 |
90 |
UTQFN-2.2x1.4-12L |