CXLE8167是一款专用于白光LED阵列的高频升压驱动芯片。其内置的0.19Ω功率管和2.0A的电流极限使得CXLE8167能为7~10吋LCD面板提供背光驱动（驱动13并3/4串白光LED阵列）。CXLE8167采用1MHz固定频率电流控制模式升压架构，通过设定外部反馈电阻上电压为200mV，使得CXLE8167既能精确的控制LED输出电流，同时保证了驱动电路高效特性。CXLE8167内置输出过压保护功能，利用SW引脚监测输出电压，当出现LED开路时，IC能自动关断实现保护。同时IC内置多种保护措施，如：软启动，过流保护，过温保护和输入欠压保护。CXLE8167采用薄型TSOT23-5封装，为节约PCB空间和减少BOM表提供最优方案
-
[ CXLE8167 ]
目录
7.相关产品
产品概述 返回TOP
CXLE8167是一款专用于白光LED阵列的高频升压驱动芯片。其内置的0.19Ω功率管和2.0A的电流极限使得CXLE8167能为7~10吋LCD面板提供背光驱动（驱动13并3/4串白光LED阵列）。CXLE8167采用1MHz固定频率电流控制模式升压架构，通过设定外部反馈电阻上电压为200mV，使得CXLE8167既能精确的控制LED输出电流，同时保证了驱动电路高效特性。CXLE8167内置输出过压保护功能，利用SW引脚监测输出电压，当出现LED开路时，IC能自动关断实现保护。同时IC内置多种保护措施，如：软启动，过流保护，过温保护和输入欠压保护。CXLE8167采用薄型TSOT23-5封装，为节约PCB空间和减少BOM表提供最优方案。The CXLE8167 is a high frequency, asynchronous boost converter designed for driving white LED arrays. With integrated 0.19Ω power switch and 2A current limit, the CXLE8167 provides enough driving capability for 7”~10” LCD backlighting(13 strings of 3 or 4 LEDs each). The device uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 200mV feedback voltage reduces power loss and improves efficiency. With the built-in over-voltage protection function (OVP), the SW pin monitors the output voltage and turn off the device if an over-voltage condition is present due to an open circuit condition. Other features include soft start, over-current limiting, thermal protection and under-voltage lockout. The CXLE8167 is available in the tiny TSOT23-5 package to provide the best solution for PCB space saving and total BOM cost.
产品特点 返回TOP
‧ 输入电压范围：2.6V~5.5V
‧ 内置0.19Ω，18V功率开关
‧ 峰值效率达93%
‧ 芯片表面温度低@ILED=180mA（VIN=3.6V）
‧ 1MHz开关频率
‧ 2A电流极限
‧ 内置LED开路保护
‧ 内置软启动功能
‧ 兼容PWM和DC两种调光方式
‧ TSOT23-5封装
‧ 符合RoHS规范及Pb-Free
2.6V to 5.5V Input Range
Internal 0.19, 18V MOSFET Switch
High Efficiency Up to 93%
Lower Surface Temperature at ILED=180mA
1MHz Switching Frequency
2A Current Limit
Open LED Overvoltage Protection
Internal Soft-Start
PWM and DC Dimming Control
Available in TSOT23-5 Package
RoHS Compliant and 100% Lead (Pb)-Free
Halogen-Free
应用范围 返回TOP
‧ 7~10吋LCD面板背光驱动
‧ MID背光驱动
‧ 上网本（Netbook）背光驱动
‧ 便携式多媒体设备
‧ GPS导航系统
7” to 10” LCD Panels
MID Backlighting
Netbook Backlighting
Portable Media Players
GPS Navigation Systems
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
a
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
白光LED驅動器 > LED背光 |
|||||||||
|
Part Number |
remark |
Vin (V) |
Vout (max)(V) |
FB(V) |
IQ(mA) |
Isw(A) |
Max LED |
Peak Efficency (%) |
Package |
|
Small Package, High Performance, Asynchronies Boost for WLED Driver |
2.6~5.5 |
18 |
0.2 |
0.4 |
2 |
15P3S |
93 |
TSOT23-5 |
|
|
White LED Driver For Buck-Boost Application |
6~25 |
32 |
Vctrl/10 |
1.3 |
1.4 |
3 x 9 = 27 |
90 |
TDFN-8 |
|
|
White LED Boost Converter with PWM Dimming and Single-Wire Interface |
2.7~5.5 |
38 |
0.2 |
0.35 |
1.3 |
12 |
91 |
TDFN-6 |
|
|
10 White LED Boost Converter with PWM Dimming and Single-Wire Series Interface |
2.5 ~ 5.5 |
38.5 |
0.2/0.3 |
0.3 |
1.3 |
12 |
88 |
TSOT23-6,SOT23-6 |
|
|
10 White LED Boost Converter with PWM Dimming |
2.5~5.5 |
38.5 |
0.2 |
0.3 |
1.3 |
12 |
88 |
TSOT23-6 |
|
|
6 String White LED Driver with Boost Converter |
2.5~24 |
43 |
0.5 |
2 |
2.5 |
6 × 10= 60 |
90 |
TQFN-20 |
|
|
4 Strings High Current White LED Driver with Boost Controller |
4.5~28 |
65 |
0.6 |
0.75 |
- |
4 x 18 =72 |
93 |
SOP-16 |
|
|
12 String White LED Driver With Boost Controller |
4.5~28 |
65 |
0.6 |
1.5 |
- |
216 |
93 |
TSSOP-28(EP) |
|
◀ 上一篇:CXLE8166白光LED的固定600kHz升压转换器集成N-FET驱动白光LED低导通电阻和低反馈电压降低了功率损耗内部软启动电路消除启动过程中的浪涌电流
下一篇▶:CXLE8168 PWM和Analog两种调光宽输入升降压白光LED驱动器宽输入电压范围为驱动白光LED设计的恒流升压转换器6～25V输入电源可编程的软启动
| 头条信息 |
|---|
