CXSD61054 fully in tegrated , high-efficiency 2.0A synchronous rectified step-down converter hi

目录jdP嘉泰姆

1.产品概述                       2.产品特点jdP嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 jdP嘉泰姆
5.产品封装图                     6.电路原理图                   jdP嘉泰姆
7.功能概述                        8.相关产品jdP嘉泰姆

 jdP嘉泰姆

一,产品概述(General Description)      jdP嘉泰姆

     The CXSD61054 is a fully in tegrated , high-efficiency  2.0A  synchronous  rectified step-down  converter.  The CXSD61054 operates at high efficiencyjdP嘉泰姆
over a wide output current load range.jdP嘉泰姆

      This device offers two operation modes,PWM control and PFM ModejdP嘉泰姆
switching control, which allows a high efficiency over the wider range of thejdP嘉泰姆
load.The  rber of readily available standard external components and isjdP嘉泰姆
available in an 6-pin SOT23 ROHS compliant package.jdP嘉泰姆

二.产品特点(Features)jdP嘉泰姆

* High Efficiency: Up to 95%jdP嘉泰姆
* 600KHz Frequency OperationjdP嘉泰姆
* 2.0A Output CurrentjdP嘉泰姆
* No Schottky Diode RequiredjdP嘉泰姆
* 3.5V to 18V Input Voltage RangejdP嘉泰姆
* 0.6V ReferencejdP嘉泰姆
 Slope Compensated Current ModejdP嘉泰姆
 Control for Excellent Line and LoadjdP嘉泰姆
 Transient ResponsejdP嘉泰姆
* Integrated internal compensationjdP嘉泰姆
* Stable with Low ESR Ceramic OutputjdP嘉泰姆
   CapacitorsjdP嘉泰姆
* Over Current Protection withjdP嘉泰姆
    Hiccup-ModejdP嘉泰姆
* Input over voltage protection(OVP)jdP嘉泰姆
*  Thermal ShutdownjdP嘉泰姆
*  Inrush Current Limit and Soft StartjdP嘉泰姆
*  Available in SOT23-6 PackagejdP嘉泰姆
*  -40°C to +85°C Temperature RangejdP嘉泰姆
三,应用范围 (Applications)jdP嘉泰姆

Distributed Power SystemsjdP嘉泰姆
Digital Set Top BoxesjdP嘉泰姆
Flat Panel Television and MonitorsjdP嘉泰姆
Wireless and DSL ModemsjdP嘉泰姆
Notebook ComputerjdP嘉泰姆
四.技术规格书下载（产品PDF）jdP嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！jdP嘉泰姆

 jdP嘉泰姆

五,产品封装图 (Package)jdP嘉泰姆

jdP嘉泰姆
六.电路原理图jdP嘉泰姆

jdP嘉泰姆
jdP嘉泰姆
七,功能概述jdP嘉泰姆

Internal Regulator jdP嘉泰姆
The CXSD61054 is a current mode step down DC/DC converter that provides excellentjdP嘉泰姆
transient response with no extra external compensation components. This device containsjdP嘉泰姆
an internal, low resistance, high voltage power MOSFET, and operates at a high 600KjdP嘉泰姆
operating frequency to ensure a compact, high efficiency design with excellent AC and DCjdP嘉泰姆
performance.jdP嘉泰姆

Error AmplifierjdP嘉泰姆
The error amplifier compares the FB pin voltage with the internal FB reference (VFB) andjdP嘉泰姆
outputs a current proportional to the difference between the two. This output current is thenjdP嘉泰姆
used to charge or discharge the internal compensation network to form the COMP voltage,jdP嘉泰姆
which is used to control the power MOSFET current. The optimized internal compensationjdP嘉泰姆
network minimizes the external component counts and simplifies the control loop design. jdP嘉泰姆
Internal Soft-StartjdP嘉泰姆
The soft-start is implemented to prevent the converter output voltage from overshootingjdP嘉泰姆
during startup. When the chip starts, the internal circuitry generates a soft-start voltage (SS)jdP嘉泰姆
ramping up from 0V to 0.6V. When it is lower than the internal reference (REF), SSjdP嘉泰姆
overrides REF so the error amplifier uses SS as the reference. When SS is higher thanjdP嘉泰姆
REF, REF regains control. The SS time is internally fixed to 1 ms.jdP嘉泰姆
Over-Current-Protection and HiccupjdP嘉泰姆
The CXSD61054 has cycle-by-cycle over current limit when the inductor current peak valuejdP嘉泰姆
exceeds the set current limit threshold. Meanwhile, output voltage starts to drop until FB isjdP嘉泰姆
below the Under-Voltage (UV) threshold, typically 30% below the reference. Once a UV isjdP嘉泰姆
triggered, the CXSD61054 enters hiccup mode to periodically restart the part. ThisjdP嘉泰姆
protection mode is especially useful when the output is dead-short to ground. The averagejdP嘉泰姆
short circuit current is greatly reduced to alleviate the thermal issue and to protect thejdP嘉泰姆
regulator. The CXSD61054 exits the hiccup mode once the over current condition isjdP嘉泰姆
removed. jdP嘉泰姆
Startup and Shutdown jdP嘉泰姆
If both VIN and EN are higher than their appropriate thresholds, the chip starts. ThejdP嘉泰姆
reference block starts first, generating stable reference voltage and currents, and then thejdP嘉泰姆
internal regulator is enabled. The regulator provides stable supply for the remainingjdP嘉泰姆
八,相关芯片选择指南               更多同类产品......jdP嘉泰姆