CXLB73122 can also be used in the standalone lithium-ion and Lithium-polymer battery chargers. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET archit

   产品概述 返回TOPMMN嘉泰姆

     CXLB73122 is a complete constant-current & constant voltage linear charger for single cell lithium-ion and Lithium-Polymer batteries.  Its SOT-23 package and low external component count make CXLB73122 ideally suited for portable applications.  Furthermore, the CXLB73122 is specifically designed to work within USB power specification.  At the same time, CXLB73122 can also be used in the standalone lithium-ion and Lithium-polymer battery chargers. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture.  Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature.  The charge voltage is fixed at 4.22V, and the charge current can be programmed externally with a single resistor.  The CXLB73122 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.  When the input supply (wall adapter or USB supply) is removed, the CXLB73122 automatically enters a low current stage, dropping the battery drain current to less than 2uA.  The CXLB73122 can be put into shutdown mode, reducing the supply current to 20uA. Other features include charge current monitor, undervoltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage. CXLB73122 is intentionally designed to have slightly negative Tempco. This provides extra protection to Lithium 

   产品特点 返回TOPMMN嘉泰姆

Ø Programmable Charge Current Up to 800mA. MMN嘉泰姆

Ø No MOSFET, Sense Resistor or Blocking Diode Required. MMN嘉泰姆

Ø Constant-Current/Constant-Voltage Operation with Thermal Protection to Maximize Charge Rate without Risk of Overheating. MMN嘉泰姆

Ø Charges Single Cell Li-Ion Batteries Directly from USB Port. MMN嘉泰姆

Ø Preset 4.22V Charge Voltage with ±1% Accuracy. MMN嘉泰姆

Ø 20uA Supply Current in Shutdown. MMN嘉泰姆

Ø 2.9V Trickle Charge Threshold MMN嘉泰姆

Ø Soft-Start Limits Inrush Current. MMN嘉泰姆

Ø Available in 5-Lead SOT-23 Package. MMN嘉泰姆

Ø 100% Lead (Pb)-FreeMMN嘉泰姆

   应用范围 返回TOPMMN嘉泰姆

Ø Cellular Telephones, PDA’s, MP3 Players. MMN嘉泰姆

Ø Charging Docks and Cradles MMN嘉泰姆

Ø Bluetooth Applications MMN嘉泰姆

   技术规格书（产品PDF) 返回TOP MMN嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持</span>！</span>
MMN嘉泰姆