Dual Slew Rate Controlled Load Switch CXAS42281 operates with an input voltage from 1.5V up to 5.5V. It is suitable for 1.8V, 3V and 5V systems. Input logic levels are TTL and 2.5V to 5V CMOS compatib

   产品概述 返回TOPaL2嘉泰姆

The CXAS42281 operates with an input voltage from 1.5V up to 5.5V. It is suitable for 1.8V, 3V and 5V systems. Input logic levels are TTL and 2.5V to 5V CMOS compatible. The typical quiescent supply current is 4μA each channel. In shutdown mode, the supply current decreases to less than 1μA. The CXAS42281 is available in a 8 pin TDFN 2X2mm package.The CXAS42281 is a dual P-channel MOSFET power switch designed for high-side load-switching applications. Each MOSFET has a typical RDS(ON) of 74mΩ at VCC=5V, allowing increased load switch current handling capacity with a low forward voltage drop. The CXAS42281 has a slew rate limited turn-on load switch and offers a shutdown load discharge circuit to rapidly turn off a load circuit when the switch is disabled. An additional feature is a slew-rate selector pin which can switch between fast and slow slew rate.

   产品特点 返回TOPaL2嘉泰姆

„ 1.5V to 5.5V Input Voltage Range aL2嘉泰姆

„ Very Low RDS(ON), Typically 74mΩ (5V) aL2嘉泰姆

„ Slew Rate Limited Turn-On Time 1ms (5V) aL2嘉泰姆

„ Fast Shutdown Load Discharge aL2嘉泰姆

„ TTL/CMOS Input Logic Level aL2嘉泰姆

„ TDFN2X2-8 PackageaL2嘉泰姆

   应用范围 返回TOPaL2嘉泰姆

„ Cellular Telephones aL2嘉泰姆

„ Digital Still Cameras aL2嘉泰姆

„ Hot Swap Supplies aL2嘉泰姆

„ Notebook Computers aL2嘉泰姆

„ Personal Communication Devices aL2嘉泰姆

„ Personal Digital Assistants (PDAs)aL2嘉泰姆

   技术规格书（产品PDF) 返回TOP aL2嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持</span>！</span>
aL2嘉泰姆